首页 / 官方标准库 / 产品质量检验

官方标准 · 一单一库

产品质量检验

共 47,217 条标准

标准列表（第 1525 / 1574 页）

ISO27850:2013 农林拖拉机.落物保护结构-试验程序和性能要求Tractors for agriculture and forestry -- Falling object protective structures -- Test procedures and performance requirements

ISO2782-1:2022 硫化橡胶或热塑性橡胶透气性的测定第1部分:压差法Rubber, vulcanized or thermoplastic - Determination of permeability to gases - Part 1: Differential-pressure methods - Third edition

ISO2781:2018 硫化橡胶或热塑性橡胶密度的测定Rubber, vulcanized or thermoplastic - Determination of density

ISO2773-2:1973 圆柱立式钻床精度检验第2部分:工作精度检验Test conditions for pillar type vertical drilling machines; Testing of the accuracy; Part II : Practical test

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO2773-1:1973 圆柱立式钻床精度检验第1部分:几何精度检验Test conditions for pillar type vertical drilling machines; Testing of the accuracy; Part I : Geometrical tests

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO2759:2014 纸板耐破强度的测定Board -- Determination of bursting strength

ISO27587:2021 皮革化学试验工艺辅助剂中游离甲醛的测定Leather - Chemical tests - Determination of free formaldehyde in process auxiliaries

ISO2758:2014 纸耐破度的测定Paper -- Determination of bursting strength

ISO2719-2016/Amd.1-2021 闪点的测定宾斯基-马丁闭口杯法Determinationofflashpoint-Pensky-Martensclosedcupmethod

ISO2719:2025 闪点的测定宾斯基-马丁闭口杯法Determination of flash point - Pensky-Martens closed cup method

ISO2719:2021 闪点的测定宾斯基-马丁闭口杯法Determination of flash point - Pensky-Martens closed cup method

ISO2719:2016/AMD1:2021 闪点的测定宾斯基-马丁斯闭口杯法Determination of flash point - Pensky-Martens closed cup method

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO2719:2016 闪点的测定宾斯基-马丁闭口杯法Determination of flash point - Pensky-Martens closed cup method

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO2719:2002 闪点的测定宾斯基-马丁闭口杯法Determination of flash point - Pensky-Martens closed cup method

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO2702:2022 紧固件热处理钢制自攻螺钉机械性能Fasteners-Heat treated tapping screws-Mechanical and physical properties - Fourth Edition

ISO26987:2008 弹性地板覆盖物-耐污染及耐化学性能的测定Resilient floor coverings -- Determination of staining and resistance to chemicals

ISO2631-1:1997 机械振动与冲击:人体暴露于全身振动的评价第1部分:一般要求1,2,3,4,5,6,8Mechanical vibration and shock -- Evaluation of human exposure to whole-body vibration -- Part 1: General requirements

ISO26262-8:2018 道路车辆-功能安全-第8部分:配套工艺Road vehicles - Functional safety - Part 8: Supporting processes

ISO26262-12:2018 道路车辆功能安全第12部分:摩托车用ISO26262的适应性Road vehicles - Functional safety - Part 12: Adaptation of ISO 26262 for motorcycles

ISO26261-2:2017 烟花-4级-第2部分:技术要求Fireworks -- Category 4 -- Part 2:Requirements

ISO2624:1990 铜及铜合金-平均粒度的估算 Copper and copper alloys - Estimation of average grain size

ISO26203-1:2018 金属材料高应变速率拉伸试验第1部分:弹性杆型系统Metallic materials - Tensile testing at high strain rates - Part 1: Elastic-bar-type systems

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO26082-1:2019 皮革测定污染的物理和机械试验方法第1部分:摩擦方法Leather - Physical and mechanical test methods for the determination of soiling - Part 1: Rubbing (Martindale) method

ISO26082-1:2012 皮革--测定污染的物理和机械试验方法--第1部分:摩擦方法Leather - Physical and mechanical test methods for the determination of soiling - Part 1: Rubbing (Martindale) method

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO2598-2:1992 铁矿石硅含量的测定第2部分:还原硅钼酸盐分光光度法Iron ores - Determination of silicon content - Part 2: Reduced molybdosilicate spectrophotometric method

ISO2597-2:2019 铁矿石总铁含量的测定第2部分:氯化钛(III)还原后的滴定法Iron ores - Determination of total iron content - Part 2: Titrimetric methods after titanium(III) chloride reduction

ISO25947-5:2017 烟花-1､2､3级-第4部分:结构和性能的技术要求Fireworks -- Categories 1,2 and 3 -- Part 5:Requirements for construction and performance

ISO25947-3:2017 烟花-1､2､3级-第3部分:最低标签要求Fireworks -- Categories 1,2 and 3 -- Part 3:Minimum labelling requirements

ISO25947-2:2017 烟花-1､2､3级-第2部分:类别与级别Fireworks -- Categories 1,2 and 3 -- Part 2:Categories and types

ISO2592:2017 石油和相关产品闪点和着火点测定克利夫兰开杯法Petroleum and related products - Determination of flash and fire points - Cleveland open cup method

上一页 1523 1524 1525 1526 1527 下一页

需要产品质量检验检测服务？

腾树检测合作实验室具备 CMA/CNAS 双重资质，专业高效

电话咨询 17602199916 在线获取报价