首页 / 官方标准库 / 产品质量检验

官方标准 · 一单一库

产品质量检验

共 47,217 条标准

标准列表（第 1524 / 1574 页）

ISO2941:2009 液压流体动力--滤芯--坍塌/爆裂压力额定值的验证 Hydraulic fluid power - Filter elements - Verification of collapse/burst pressure rating

ISO2921:2019 硫化橡胶低温性能的测定温度回缩法(TR试验)Rubber, vulcanized - Determination of low-temperature characteristics - Temperature-retraction procedure (TR test)

ISO28981:2009/Amd1:2015 焊接及相关工艺焊接材料镍及镍合金用药芯焊丝分类Welding and allied processes - Welding consumables - Tubular cored electrodes for nickel and nickel alloys

ISO28981:2009 轻便摩托车在底盘测功机上设置行驶阻力的方法Mopeds - Methods for setting the running resistance on a chassis dynamometer

ISO28927-13:2022 手持便携式动力工具振动试验方法方法第13部分:接合件传动工具Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 13: Fastener driving tools - First Edition

ISO28921-1:2022 工业阀门低温用隔离阀第1部分:设计､制造及生产测试Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing - Second edition

ISO289-1:2014 未硫化橡胶用圆盘剪切黏度计进行测定第1部分:门尼黏度的测定Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 1: Determination of Mooney viscosity

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO2884-1:2024 色漆和清漆用旋转粘度计测定粘度第1部分:在高剪切速率下使用锥板测量几何体测绝对粘度Paints and varnishes - Determination of viscosity using rotational viscometers - Part 1: Absolute viscosity measurement with cone-plate measuring geometry at high shear rates

ISO2878:2011 硫化橡胶或热塑性橡胶抗静电和导电制品电阻的测定Rubber, vulcanized or thermoplastic - Antistatic and conductive products - Determination of electrical resistance

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO28706-1:2008 非接触食物搪瓷制品Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 1: Determination of resistance to chemical corrosion by acids at room temperature

ISO287:2017 纸和纸板-成批纸和纸板中水分含��的测定-烘干法Paper and board -Determination of moisture content of a lotOven-drying method

ISO2867:2011 土方机械通道装置Earth-moving machinery - Access systems

ISO2860:1992 土方机械最小入口尺寸Earth-moving machinery -- Minimum access dimensions

ISO28580:2018 乘用车､载重汽车和客车轮胎滚动阻力测量方法单点试验和测量结果的相关性Passenger car, truck and bus tyre rolling resistance measurement method - Single point test and correlation of measurement results

ISO284:2025 输送带导电性规范和试验方法Conveyor belts - Electrical conductivity - Specification and test method - Fifth Edition

ISO283:2023 织物芯输送带全厚度拉伸强度､断裂伸长率及参考力伸长率试验方法Textile conveyor belts-Full thickness tensile strength, elongation at break and elongation at the reference load-Test method - Fifth Edition

ISO2819:2017 金属基材上的金属涂层 - 电沉积和化学沉积涂层 - 可用于测试粘合性的方法Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion

ISO2815:2003 色漆和清漆巴克霍尔兹压痕试验Paints and varnishes -- Buchholz indentation test

ISO2813:2014 色漆和清漆非金属漆膜镜面在20℃､60℃和85℃时光泽的测定Paints and varnishes -- Determination of gloss value at 20 degrees, 60 degrees and 85 degrees

ISO2812-4:2017 色漆和清漆耐液体性的测定第4部分:点滴法Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods

ISO2812-3:2019 色漆和清漆耐液体介质的测定第3部分:利用某种吸收介质的方法Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium

ISO2812-2:2007 色漆和清漆-耐液体Spart 2的测定:水浸法 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO2812-1:2017 色漆和清漆耐液体介质的测定第1部分:在除水以外的液体中沉浸Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water

ISO2812:1974 色漆和清漆耐液体介质的测定Paints and varnishes - Determination of resistance to liquids

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO2811-4:2011 色漆和清漆密度的测定第4部分:压杯法Paints and varnishes -- Determination of density -- Part 4: Pressure cup method

ISO2811-1:2023 色漆和清漆密度的测定第1部分:比重瓶法Paints and varnishes-Determination of density-Part 1: Pycnometer method

ISO2810:2020 油漆和清漆 - 涂料的天然风化 - 曝光和评估Paints and varnishes - Natural weathering of coatings - Exposure and assessment

ISO2808:2019 色漆和清漆漆膜厚度的测定Paints and varnishes - Determination of film thickness

ISO2796:1986 硬质泡沫塑料尺寸稳定性试验方法Cellular plastics, rigid -- Test for dimensional stability

ISO27895:2009 真空技术阀门漏率测试Vacuum technology -- Valves -- Leak test

上一页 1522 1523 1524 1525 1526 下一页

需要产品质量检验检测服务？

腾树检测合作实验室具备 CMA/CNAS 双重资质，专业高效

电话咨询 17602199916 在线获取报价