首页 / 官方标准库 / 产品质量检验

官方标准 · 一单一库

产品质量检验

共 47,217 条标准

标准列表（第 1548 / 1574 页）

ISO15156-3:2020 石油天然气工业油气开采中用于含硫化氢环境的材料第3部分:抗开裂耐蚀合金和其他合金Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys

ISO15156-2:2020 石油天然气工业油气开采中用于含硫化氢环境的材料第2部分:抗开裂碳钢､低合金钢和铸铁Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons

ISO15156-1:2020 石油天然气工业油气开采中用于含硫化氢环境的材料第1部分:选择抗裂纹材料的一般原则Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials

ISO15147:2012 轻型输送带切割轻型输送带宽度和长度的公差Light conveyor belts -- Tolerances on widths and lengths of cut light conveyor belts

ISO1513:2010 色漆和清漆.试验样品的检验和制备Paints and varnishes -- Examination and preparation of test samples

ISO15106-2:2003 塑料薄膜和薄片水蒸气透过率的测定红外检测器法Plastics - Film and Sheeting - Determination of Water Vapour Transmission Rate - Part 2: Infrared Detection Sensor Method First Edition

ISO15106-2 塑料薄膜和薄板水��气透过率的测定第2部分:红外探测传感器法Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method

ISO15105-2:2003 塑料制品薄膜和薄片气体透过性试验方法第2部分:等压法This part of ISO 15105 specifies a method for the determination of the gas-transmission rate of any plastic material in the form of film, sheeting Plastics - Film and sheeting - Determination of gas transmission rate - Part 2: Equal-pressure method

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO15105-1:2007 塑料薄膜和薄板.气体传输率的测定.第1部分压差法Plastics -- Film and sheeting -- Determination of gas-transmission rate -- Part 1: Differential-pressure methods

ISO15096:2020 首饰和贵金属-高纯银的测定-ICP-OES光谱差减法Jewellery and precious metals -Determination of high purity silver -Difference method using ICP-OES

ISO15093:2020 首饰和贵金属--高纯度金､铂､钯的测定--ICP-0ES光谱差减法Jewellery and precious metals -Determination of high purity gold,platinum and palladium - Difference method using ICP-OES

ISO15042:2017+Amd.1:2020 多联式空调和空气源热泵��能测试与评价 Multiple split-system air conditioners and air-to-air heat pumps - Testing and rating for performance

ISO15039:2003/Amd.1:2015 玻璃纤维无捻粗纱浸润剂溶解度的测定Textile-glass rovings -- Determination of solubility of size

ISO15025:2016 防护服隔热和阻燃阻燃性能试验方法Protective clothing -- Protection against flame -- Method of test for limited flame spread

ISO15008:2017 道路车辆运输信息和控制系统的人体工程学方面车载视觉演示的规范和测试程序Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and test procedures for in-vehicle visual presentation

ISO15006:2011 道路车辆--交通信息和控制系统的人机工程学方面--车内听觉演示规范 Road vehicles - Ergonomic aspects of transport information and control systems - Specifications for in-vehicle auditory presentation

ISO14993:2026 金属和合金的腐蚀 - 加速试验涉及循环暴露于盐雾干燥和潮湿条件下Corrosion of metals and alloys - Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions

ISO14993:2018 金属和合金的腐蚀 - 加速试验涉及循环暴露于盐雾干燥和潮湿条件下Corrosion of metals and alloys - Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO14982:1998 农林机械;电磁兼容性-试验方法和验收标准 Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria

ISO14931:2021 皮革制衣用皮革的选择指南(毛皮除外)Leather - Leather for apparel (excluding furs) - Specifications and sampling procedures

ISO14911:1998 水质离子色谱法测定水和废水中溶解性锂离子､钠离子､铵离子､钾离子､锰离子､钙离子､镁离子､锶离子和钡离子(Water quality-Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography-Method for water and waste water)

ISO14903:2025 制冷系统及热泵部件和接头的密封性评定Refrigerating systems and heat pumps-Qualification of tightness of components and joints

ISO14890:2013 输送带具有橡胶或塑料覆盖层的普通用途织物芯输送带规范Conveyor belts -- Specification for rubber- or plastics-covered conveyor belts of textile construction for general use

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO14855-2:2018 控制堆肥条件下塑料材料最终好氧生物降解性的测定 - 通过分析二氧化碳进行分析的方法 - 第2部分:实验室规模测试中二氧化碳的重量测量Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test

ISO14855-1:2012 塑料材料在受控堆肥条件下最终需氧生物降解能力的测定析出二氧化碳的分析方法第1部分:一般方法Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide -- Part 1: General method

ISO14852:2021 水介质中塑料材料富氧菌生物降解性的测定二氧化碳增重分析法Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide

ISO14851:2019 测定水性介质中塑料材料的最终好氧生物降解性 - 通过测量封闭式呼吸仪中的氧气需求的方法Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer

ISO148-3:2016 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines 摆锤式冲击试验机检验用夏比V型缺口标准试样

ISO148-1:2016 金属材料夏比摆锤冲击试验第1部分:试验方法Metallic materials -- Charpy pendulum impact test -- Part 1: Test method

ISO14743:2020 气动用于塑料管的插入式管接头Pneumatic fluid power - Push-in connectors for thermoplastic tubes

上一页 1546 1547 1548 1549 1550 下一页

需要产品质量检验检测服务？

腾树检测合作实验室具备 CMA/CNAS 双重资质，专业高效

电话咨询 17602199916 在线获取报价