首页 / 官方标准库 / 产品质量检验

官方标准 · 一单一库

产品质量检验

共 47,217 条标准

标准列表（第 1540 / 1574 页）

ISO17074:2006 皮革物理和机械试验耐火焰水平蔓延的测定Leather -- Physical and mechanical tests -- Determination of resistance to horizontal spread of flame

ISO17072-2:2022 皮革金属元素的化学测定第2部分:金属总含量Leather - Chemical determination of metal content - Part 2: Total metal content

ISO17072-2:2019 皮革金属含量的化学测试方法第2部分:重金属总量Leather - Chemical determination of metal content - Part 2: Total metal content (Second edition)

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO17072-2:2011 皮革金属含量的化学测定第2部分:总金属含量Leather - Chemical determination of metal content - Part 2: Total metal content

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO17072-1:2019 皮革金属含量的化学测定第1部分:可提取的金属Leather - Chemical determination of metal content - Part 1: Extractable metals

ISO17072-1:2011 皮革金属含量的化学测定第1部分:可提取金属Leather - Chemical determination of metal content - Part 1: Extractable metals

废止，仅限能力项目库范围内现行有效产品标准��用本标准及监督抽检时申请...

ISO17071:2006 皮革物理和机械试验雾化特性的测定Leather -- Physical and mechanical tests -- Determination of fogging characteristics

ISO17070:2015 皮革化学测试四氯苯酚-三氯苯酚-二氯苯酚-单氯苯酚-同分异构体和五氯苯酚含量的测定Leather -- Chemical tests -- Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content

ISO1701-1:2004 可变高度工作台铣床试验条件精度检验第1部分:卧式主轴铣床Test conditions for milling machines with table of variable height -- Testing of the accuracy -- Part 1: Machines with horizontal spindle

ISO16929:2021 塑料中间规模试验中在规定的堆肥条件下塑料材料分解程度的测定Plastics - Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test

ISO16925:2021 色漆和清漆涂层耐高压水喷射性的测定Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting

ISO16890-4:2022 一般通风用空气过滤器.第4部分:测定最小分数试验效率的调节方法Air filters for general ventilation - Part 4: Conditioning method to determine the minimum fractional test efficiency

ISO16890-3:2024 一般通风用空气过滤器第3部分:重量效率和气流阻力与捕获的试验粉尘质量的测定Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured

ISO16890-2:2022 一般通风用空气过滤器.第2部分:分数效率和气流阻力的测量Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance

ISO16890-1:2016 一般通风用空气过滤器 - 第1部分:基于颗粒物质效率(ePM)的技术规格要求和分类系统Air filters for general ventilation - Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM)

ISO16889:2022 液压传动过滤器评价滤芯过滤性能的多道方法Hydraulic fluid power - Filters - Multi-pass method for evaluating filtration performance of a filter element

ISO16869:2008 塑料塑料防霉剂的防霉效果评估Plastics -- Assessment of the effectiveness of fungistatic compounds in plastics formulations

ISO16862:2003 色漆和清漆抗流挂性评定Paints and varnishes -- Evaluation of sag resistance

ISO16859-1:2015 金属材料里氏硬度试验第1部分:试验方法Metallic materials -- Leeb hardness test -- Part 1: Test method

ISO16851:2012 织物芯输送带--无边(拼接)输送带的净长度的测定Textile conveyor belts -- Determination of the net length of an endless (spliced) conveyor belt

ISO16847:2016 纺织品清洁后起绒织物消光外观评定的试验方法Textiles - Test method for assessing the matting appearance of napped fabrics after cleansing

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO16845-2:2018 道路车辆-控制器局域网(CAN)一致性测试计划-第2部分:高速媒体接入单元-一致性测试计划Road vehicles - Controller area network (CAN) conformance test plan - Part 2: High-speed medium access unit - Conformance test plan

ISO16805:2003 色漆和清漆用漆基-玻璃化转变温度的测定Binders for paints and varnishes -- Determination of glass transition temperature

ISO1680:1999 旋转电机噪声测定方法及限值第1部分:旋转电机噪声测定方法Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO16787:2017 智能运输系统辅助停车系统(APS)性能要求和测试程序Intelligent transport systems - Assisted parking system (APS) - Performance requirements and test procedures

ISO16773-2:2016 涂层和未涂层金属试样的电化学阻抗谱(EIS).第2部分:数据收集Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens -- Part 2: Collection of data

ISO16770:2019 塑料-聚乙烯环境应力开裂(ESC)的测定-全缺口蠕变试验(FNCT)Plastics - Determination of environmental stress cracking (ESC) of polyethylene - Full-notch creep test (FNCT)

ISO16754:2008 土方机械履带式机器平均接地比压的确定Earth-moving machinery -- Determination of average ground contact pressure for crawler machines

ISO16750-5:2023 道路车辆-电气及电子设备的环境条件和试验-第5部分:化学负荷Road vehicles-Environmental conditions and testing for electrical and electronic equipment-Part 5: Chemical loads

ISO16750-5:2010 道路车辆--电气和电子设备的环境条件和试验第5部分:化学负荷 Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 5: Chemical loads

上一页 1538 1539 1540 1541 1542 下一页

需要产品质量检验检测服务？

腾树检测合作实验室具备 CMA/CNAS 双重资质，专业高效

电话咨询 17602199916 在线获取报价