首页 / 官方标准库 / 产品质量检验

官方标准 · 一单一库

产品质量检验

共 47,217 条标准

标准列表（第 1516 / 1574 页）

ISO4602:2010 纺织玻璃纤维.织物.单位长度经纱和纬纱的纱数��测定Reinforcements - Woven fabrics - Determination of number of yarns per unit length of warp and weft

ISO4593:1993 塑料薄膜和薄片厚度的测定机械测量法 Plastics - Film and sheeting - Determination of thickness by mechanical scanning

ISO4592:1992 塑料薄膜和薄片长度和宽度的测定Plastics - Film and sheeting - Determination of length and width

ISO4591:1992 塑料制品;薄膜和薄片-用重量分析技术(重量分析厚度)测定样品的平均厚度､轧辊的平均厚度和成品率 Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)

ISO4589-3:2017 塑料用氧指数法测定燃烧行为第3部分:高��试验Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test

ISO4589-2:2017 塑料-用氧指数法测定燃烧行为-第2部分:室温试验Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test

ISO4589-1:2017 塑料 - 氧指数测定燃烧行为 - 第1部分:一般要求Plastics - Determination of burning behaviour by oxygen index - Part 1: General requirements

ISO4589-1:1996 塑料制品用氧测定燃烧性能试验1:指南Plastics - Determination of burning behaviour by oxygen index - Part 1: Guidance

废止，仅限��力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO4589:1984 塑料.以氧指数测定其易燃性Plastics; Determination of flammability by oxygen index

废止，仅限能力项目库范围内现行有效产品��准引用本标准及监督抽检时申请...

ISO4587:2003 粘合剂刚性对刚性的连接组件拉伸塔接剪切强度的测定 Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies

ISO4586-2:2018 高压装饰性层压板 (HPL, HPDL). 基于热固树脂的薄板材 (通常称为层压板). 第2部分: 性能测定High-pressure decorative laminates(HPL, HPDL)-Sheets based on thermosetting resins (usually called laminates)-Part 2:Determination of properties

ISO4582:2025 塑料在玻璃过滤后太阳辐射､自然气候或实验室辐射源暴露后颜色和性能变化的测定Plastics - Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources

ISO4582:2017 塑料-在玻璃天然风化或人造光下暴露于日光后的颜色和变化的变化的测定Plastics - Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO4577:2019 塑料-聚丙烯和丙烯共聚物-空气中热氧化稳定性的测定-烘箱法Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air - Oven method

ISO4548-9:2008 内燃机全流式机油滤清器试验方法第9部分:进､出口止回阀试验Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 9: Inlet and outlet anti-drain valve tests

ISO4548-7:2012 内燃机全流式机油滤清器试验方法第7部分:振动疲劳试验Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 7: Vibration fatigue test

ISO4548-6:2021 内燃机全流式机油滤清器试验方法试验方法第6部分:静态爆裂压力试验Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test

ISO4548-5:2020 内燃机全流式机油滤清器试验方法第5部分:液压脉冲耐久性试验Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 5: Test for hydraulic pulse durability

ISO4548-4:1997 内燃机全流式机油滤清器试验方法第4部分:原始容灰量､滤芯寿命和累积效率(重量法)Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 4: Initial particle retention efficiency, life and cumulative efficiency (gravimetric method)

ISO4548-3:1997 内燃机全流式机油滤清器试验方法第3部分:耐高压差和耐高温性Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 3: Resistance to high differential pressure and to elevated temperature

ISO4548-2:1997 内燃机全流式机油滤清器试验方法第2部分:滤芯旁通阀特性Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 2: Element by-pass valve characteristics

ISO4548-12:2017 内燃机全流式机油滤清器试验方法第12部分:采用颗粒计数法测定滤清效率和容灰量Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting and contaminant retention capacity

ISO4548-1:1997 内燃机全流式机油滤清器试验方法第1部分:压差/流量特性Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 1: Differential pressure/flow characteristics

ISO4541:1978 金属和其他无机覆盖层腐蚀膏腐蚀试验(CORR)法Metallic and other non-organic coatings -- Corrodkote corrosion test (CORR test)

ISO4532:1991 搪瓷和搪瓷-搪瓷制品耐冲击性的测定-手枪试验 Vitreous and porcelain enamels - Determination of the resistance of enamelled articles to impact - Pistol test

ISO4498:2010 烧结金属材料(不包括硬质合金)表观硬度和显微硬度的测定Sintered metal materials, excluding hardmetals -- Determination of apparent hardness and microhardness

ISO4484-3:2023 纺织品及纺织产品来自纺织品的微塑料第3部分:用家用洗涤法测量从纺织最终产品中释放的收集物质量Textiles and textile products-Microplastics from textile sources-Part 3: Measurement of collected material mass released from textile end products by domestic washing method

ISO4484-1:2023 纺织品和纺织产品纺织来源的微塑料第1部分:洗涤过程中织物材料损失的测定Textiles and textile products-Microplastics from textile sources-Part 1: Determination of material loss from fabrics during washing - First Edition

ISO4427-1:2017 给水用聚乙烯(PE)管道系统第1部分:总则This document specifies the general aspects of polyethylene (PE) compounds for the manufacture of pressure pipes and fittings (mains and service pipes Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 1: General

ISO4414:2010 气动对系统及其元件的一般规则和安全要求Pneumatic fluid power -- General rules and safety requirements for systems and their components

上一页 1514 1515 1516 1517 1518 下一页

需要产品质量检验检测服务？

腾树检测合作实验室具备 CMA/CNAS 双重资质，专业高效

电话咨询 17602199916 在线获取报价