首页 / 官方标准库 / 产品质量检验

官方标准 · 一单一库

产品质量检验

共 47,217 条标准

标准列表（第 1508 / 1574 页）

ISO6396:2008 土方机械司机位置发射声压级的测定动态试验条件Earth-moving machinery -- Determination of emission sound pressure level at operators position -- Dynamic test conditions

ISO6395:2008 土方机械声功率级的测定动态试验条件Earth-moving machinery -- Determination of sound power level -- Dynamic test conditions

ISO6393:2008 土方机械声功率级的测定定置试验条件Earth-moving machinery -- Determination of sound power level -- Stationary test conditions

ISO6383-2:1983 塑料薄膜和薄片耐撕裂性能的测定第2部分:埃莱门多夫(Elmendor)法Plastics-Film and sheeting-Determination of tear resistance-Part 2: Elmendorf method

ISO6383-1:2015 塑料薄膜和薄片耐撕裂性能的测定第1部分:裤形撕裂法Plastics -- Film and sheeting -- Determination of tear resistance -- Part 1: Trouser tear method

ISO638-2:2022 纸､纸板､纸浆和纤维素纳米材料烘箱干燥法测定绝干物含量第2部分:纤维素纳米材料的悬浮液Paper, board, pulps and cellulosic nanomaterials - Determination of dry matter content by oven-drying method - Part 2: Suspensions of cellulosic nanomaterials - Second Edition

ISO638-1:2022 纸､纸板､纸浆和纤维素纳米材料烘箱干燥法测定绝干物含量第1部分:固体材料Paper, board, pulps and cellulosic nanomaterials - Determination of dry matter content by oven-drying method - Part 1: Materials in solid form - Second edition

ISO6369:2023 商用制冰机.分类､要求和试验条件Ice makers for commercial use - Classification, requirements and test conditions

ISO6358-1:2013+Amd.1:2020 气动使用可压缩流体元件的流量特性测定第1部分:稳态流动的一般规则和试验方法Pneumatic fluid power -Determination of flow-rate characteristics of components using compressible fluids -Part 3:Alternative test methods

ISO6356:2012 铺地织物静电习性评价行走试验Textile and laminate floor coverings -- Assessment of static electrical propensity -- Walking test

ISO6353-1:1982 化学试剂分析--第1部分:通用方法Reagents for chemical analysis -- Part 1: General test methods

ISO6330:2021 纺织品纺织品测试用家庭洗涤和烘干程序Textiles - Domestic washing and drying procedures for textile testing

ISO6327:1981 气体分析-天然气水露点的测定-冷却表面冷凝湿度计Gas analysis - Determination of the water dew point of natural gas - Cooled surface condensation hygrometers

ISO6315:1980 道路车辆制动衬片腐蚀引起的衬片铁质结合面的粘结试验程序Road vehicles-Brake linings-Seizure to ferrous mating surface due to corrosion-Test procedure

ISO6314:1980 道路车辆--制动衬片--耐水､耐盐溶液､耐油和制动液--试验程序 Road vehicles - Brake linings - Resistance to water, saline solution, oil and brake fluid - Test procedure

ISO6313:1980 道路车辆--制动衬片--热对盘式制动片尺寸和形状的影响--试验程序 Road vehicles - Brake linings - Effects of heat on dimensions and form of disc brake pads - Test procedure

ISO6312:2010 道路车辆制动衬片盘式制动块总成和鼓式制动蹄总成剪切强度试验方法Road vehicles -- Brake linings -- Shear test procedure for disc brake pad and drum brake shoe assemblies

ISO6311:1980 道路车辆--制动衬片--衬砌材料的内部抗剪强度--试验程序 Road vehicles - Brake linings - Internal shear strength of lining material - Test procedure

ISO6310:2009 道路车辆制动衬片压缩应变试验方法Road vehicles -- Brake linings -- Compressive strain test methods

ISO630-2:2021 结构��-第2部分:通用结构钢的交货技术条件Structural steels - Part 2: Technical delivery conditions for structural steels for general purposes

ISO6301-2:2018 气动气动油雾器第2部分:评定商务文件中包含的主要特性的试验方法Pneumatic fluid power - Compressed-air lubricators - Part 2: Test methods to determine the main characteristics to be included in suppliers literature

ISO629:1982 钢和铸铁锰含量的测定分光光度法Steel and cast iron -- Determination of manganese content -- Spectrophotometric method

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO6272-2-2011 色漆和清漆快速变形(耐冲击性)试验第2部分:落锤试验(小面积冲头)Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 2: Falling-weight test, small-area indenter

ISO6272-2:2011 色漆和清漆快速变形(冲击承受性)试验第2部分:落锤试验､小范围凹穴Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 2: Falling-weight test, small-area indenter

ISO6272-2:2002 色漆和清漆快速变形(抗冲击)试验第2部分:小面积压头落锤试验Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO6272-1-2011 色漆和清漆快速变形(耐冲击性)试验第1部分:落锤试验(大面积冲头)Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 1: Falling-weight test, large-area indenter

ISO6272-1:2011 油漆和清漆快速变形(冲击承受性)试验第1部分:落锤试验､大范围凹穴Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 1: Falling-weight test, large-area indenter

ISO6272-1:2002 色漆和清漆快速变形(抗冲击)试验第1部分:大面积压头落锤试��Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO6270-2:2025 油漆和清漆-耐湿性的测定-第2部分:冷凝(柜内曝光)Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir)

ISO6270-2:2017 油漆和清漆 - 耐湿性的测定 - 第2部分:冷凝(柜内曝光)Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir)

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

上一页 1506 1507 1508 1509 1510 下一页

需要产品质量检验检测服务？

腾树检测合作实验室具备 CMA/CNAS 双重资质，专业高效

电话咨询 17602199916 在线获取报价