首页 / 官方标准库 / 产品质量检验

官方标准 · 一单一库

产品质量检验

共 47,217 条标准

标准列表（第 1502 / 1574 页）

ISO7781:2017 苯乙烯-丁二烯生胶皂和有机酸含量的测定 Styrene-butadiene rubber, raw - Determination of soap and organic-acid content

ISO7779:2018 声学 - 信息技术和电信设备发射的空中噪声测量Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment

ISO7778:2014 钢铁产品的厚度特性Through-thickness characteristics for steel products

ISO7771:1985 纺织品织物冷水浸渍后尺寸变化的测定Textiles -- Determination of dimensional changes of fabrics induced by cold-water immersion

ISO7770:2009 纺织品清洗后评定织物接缝外观平滑度的试验方法Textiles -- Test method for assessing the smoothness appearance of seams in fabrics after cleansing

ISO7769:2009 纺织品清洗后评定织物外观褶痕的试验方法Textiles -- Test method for assessing the appearance of creases in fabrics after cleansing

ISO7768:2009 纺织品清洗后评定织物外观平整度的试验方法Textiles -- Test method for assessing the smoothness appearance of fabrics after cleansing

ISO7765-1:1988 塑料薄膜和薄片抗冲击性能试验方法自由落镖法第1部分:梯级法Plastics film and sheeting -- Determination of impact resistance by the free-falling dart method -- Part 1: Staircase methods

ISO7743:2017 橡胶硫化或热塑性 - 压缩应力 - 应变性能的测定Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties

ISO764:2020 钟表防磁手表Horology - Magnetic resistant watches

ISO7637-3:2016 道路车辆电气/电子部件对传导和耦合引起的电骚扰试验方法第2部分:沿电源线的电瞬态传导发射和抗扰性Road vehicles -- Electrical disturbances from conduction and coupling -- Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines

ISO7637-2:2011 道路车辆由传导和耦合引起的电瞬态骚扰第2部分:沿电源线的电瞬态传导Road vehicles -- Electrical disturbances from conduction and coupling -- Part 2: Electrical transient conduction along supply lines only

ISO7637-2:2004 道路车辆传导和耦合产生的电干扰第2部分:仅沿供电线路的电瞬态传导Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO7626-2:2015 振动与冲击机械导纳的试验确定第二部分用激振器作单点平动激励测量Mechanical vibration and shock -- Experimental determination of mechanical mobility -- Part 2: Measurements using single-point translation excitation with an attached vibration exciter

ISO7623:2022 钢丝绳芯输送带绳芯与涂层之间粘合力试验原始试验和热处理Steel cord conveyor belts-Cord-to-coating bond test-Initial test and after thermal treatment - Fourth edition

ISO7623:2015 钢丝绳芯输送带绳芯与涂层之间粘合力试验原始试验和热处理Steel cord conveyor belts-Cord-to-coating bond test-Initial test and after thermal treatment - Fourth edition

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO7622-2:2022 钢丝绳芯输送带.纵向牵引试验.第2部分:抗拉强度的测量Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength

ISO7622-2:2015 钢丝绳芯输送带.纵向牵引试验.第2部分:抗拉强度的测量Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength

废止，仅限能力项目库范围内现行��效产品标准引用本标准及监督抽检时申请...

ISO7619-1:2004 硫化橡胶或热塑性橡胶压痕硬度的测定第1部分:硬度计法(肖氏硬度)Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO7616:1986 硬质泡沫塑料在规定负荷和温度条件下压缩蠕变的测定Cellular plastics, rigid -- Determination of compressive creep under specified load and temperature conditions

ISO760:1978 水的测定卡尔.费休法(通用方法)Determination of water -- Karl Fischer method (General method)

ISO7587:1986 锡铅合金电镀层规范和试验方法Electroplated coatings of tin-lead alloys -- Specification and test methods

ISO758:1976 工业用液态化学品-20℃时的密度测定Liquid chemical products for industrial use -- Determination of density at 20 degrees C

ISO7571:1986 木工机床平刨床术语和精度Woodworking machines -- Surface planing machines with cutterblock for one-side dressing -- Nomenclature and acceptance conditions

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO7568:1986 木工机床单面压刨床术语和精度Woodworking machines -- Thickness planing machines with rotary cutterblock for one-side dressing -- Nomenclature and acceptance conditions

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO7546:1983 土方机械装载机和正铲挖掘机的铲斗容量标定Earth-moving machinery -- Loader and front loading excavator buckets -- Volumetric ratings

ISO7539-8:2000 金属和合金的腐蚀应力腐蚀试验第8部分:焊接试样的制备和应用Corrosion of metals and alloys -- Stress corrosion testing -- Part 8: Preparation and use of specimens to evaluate weldments

ISO7539-7:2005 金属和合金的腐蚀应力腐蚀试验第7部分:慢应变速率试验Corrosion of metals and alloys - Stress corrosion testing - Part 7: Method for slow strain rate testing

ISO7539-6:2018 金属和合金的腐蚀应力腐蚀试验第6部分:恒载荷或恒位移下预裂纹试样的制备和应用Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement

ISO7539-5:1989 金属和合金的腐蚀应力腐蚀试验第5部分:C型环试样的制备和应用Corrosion of metals and alloys - Stress corrosion testing - Part 5: Preparation and use of C-ring specimens

上一页 1500 1501 1502 1503 1504 下一页

需要产品质量检验检测服务？

腾树检测合作实验室具备 CMA/CNAS 双重资质，专业高效

电话咨询 17602199916 在线获取报价