首页 / 官方标准库 / 产品质量检验

官方标准 · 一单一库

产品质量检验

共 47,217 条标准

标准列表（第 1496 / 1574 页）

ISO8974-2002 气相色谱法测定酚醛树脂中残留苯酚含量Plastics - Phenolic Resins - Determination of Residual Phenol Content by Gas Chromatography Third Edition

ISO8894-1:2010 耐火材料-导热系数的测定第1部分:热线法(交叉排列和电阻温度计) Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer)

ISO8873-1-2006 喷涂硬质聚氨酯泡沫塑料第1部分:材料规范Rigid cellular plastics -- Spray-applied polyurethane foam for thermal insulation -- Part 1: Material specifications

ISO8820-9:2014 道路车辆熔断器第9部分:短引脚式熔断器(K型)Road vehicles -- Fuse-links -- Part 9: Fuse-links with shortened tabs (Type K)

ISO8820-8:2019 道路车辆熔断器第8部分:额定电压450V的带螺栓触点的熔断器(H型和J型) Road vehicles - Fuse-links - Part 8: Fuse-links with bolt-in contacts (Type H and J) with rated voltage of 450 V

ISO8820-5:2015 道路车辆-熔断器-第5部分:板型熔断器SF30和SF51型及测试夹具Road vehicles -- Fuse-links -- Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures

ISO8820-4:2016 道路车辆熔断器第4部分:插座式(A型)和螺栓式(B型)的熔断器及其试验夹具Road vehicles-Fuse-links-Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures

ISO8820-3:2015 道路车辆熔断器第3部分:片式熔断器,C型(中型),E型(高电流)和F型(微型)Road vehicles -- Fuse-links -- Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)

ISO8820-1:2014 道路车辆熔断器第1部分:定义和通用试验要求Road vehicles -- Fuse-links -- Part 1: Definitions and general test requirements

ISO8791-4:2021 纸和纸-板粗糙度/平滑度的测定(空气泄漏法)第4部分:印刷表面法Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4: Print-surf method

ISO8791-2:2013 纸和纸-板粗糙度/平滑度的测定(空气泄漏法)第2部分:本特生法Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 2: Bendtsen method

ISO8787:1986 纸和纸板毛细吸液高度的测定(克列姆法)Paper and board -- Determination of capillary rise -- Klemm method

ISO8784-1:2014 纸浆和纸板-微生物检验-第1部分:基于分解的细菌和细菌孢子的计数Pulp, paper and board - Microbiological examination - Part 1: Enumeration of bacteria and bacterial spores based on disintegration

ISO8781-3:1990 颜料和体质颜料分散性的评定方法第3部分:光泽变化评定Pigments and extenders -- Methods of assessment of dispersion characteristics -- Part 3: Assessment from the change in gloss

ISO8781-2:1990 颜料和体质颜料分散性的评定方法第2部分:研磨细度变化的测定Pigments and extenders -- Methods of assessment of dispersion characteristics -- Part 2: Assessment from the change in fineness of grind

ISO8781-1:1990 颜料和稀释剂色散特性评定方法第1部分:有色颜料着色力变化的��定Pigments and extenders -- Methods of assessment of dispersion characteristics -- Part 1: Assessment from the change in tinting strength of coloured pigments

ISO8780-5:1990 颜料和稀释剂色散特性评定用色散方法第5部分:用自动研磨机分散Pigments and extenders -- Methods of dispersion for assessment of dispersion characteristics -- Part 5: Dispersion using an automatic muller

ISO8780-1:1990 颜料和稀释剂色散特性评定用色散方法第1部分:前言Pigments and extenders -- Methods of dispersion for assessment of dispersion characteristics -- Part 1: Introduction

ISO877-2:2009 塑料制品;太阳辐射暴露方法第2部分:直接风化和窗玻璃后暴露 Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

ISO8770-2003 建筑物内污废水排放(低温和高温)用塑料管系聚乙烯(PE)Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Polyethylene (PE)

ISO8754:2025 石油产品-硫含量的测定-能量色散X射线荧光光谱法Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry

ISO8749:1986 销子和带槽销剪切试验Pins and grooved pins -- Shear test

ISO8710:2010 摩托车-制动器和制动系统-试验和测量方法 Motorcycles - Brakes and brake systems - Tests and measurement methods

ISO8709:2010 轻便摩托车;制动器和制动系统--试验和测量方法 Mopeds - Brakes and brake systems - Tests and measurement methods

ISO8706:1990 两轮轻便摩托车--侧看台和中间看台的驻车稳定性 Two-wheeled mopeds - Parking stability of side- and centre-stands

ISO8705:2005 轻便摩托车;重心位置的测量方法 Mopeds - Measurement method for location of centre of gravity

ISO868:2003 塑料和硬质橡胶用硬度计测定压痕硬度[邵尔(Shore)硬度]Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)

ISO8653:2016 首饰-指环尺寸-定义､测量和标记Jewellery -- Ring-sizes -- Definition, measurement and designation

ISO8645:1988 轻便摩托车;轻合金车轮--试验方法 Mopeds - Light-alloy wheels - Test method

ISO8643:2017 土方机械液压挖掘机和挖掘装载机下降控制装置要求和试验Earth-moving machinery-Hydraulic excavator and backhoe loader lowering control device-Requirements and tests

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

上一页 1494 1495 1496 1497 1498 下一页

需要产品质量检验检测服务？

腾树检测合作实验室具备 CMA/CNAS 双重资质，专业高效

电话咨询 17602199916 在线获取报价