首页 / 官方标准库 / 产品质量检验

官方标准 · 一单一库

产品质量检验

共 47,217 条标准

标准列表（第 1489 / 1574 页）

IEC60061-1:2005 灯头､灯座及检验其互换性和安全性的量规.第1部分:灯头Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC60060-2:2025 高压试验技术第2部分:测量系统High-voltage test techniques - Part 2: Measuring systems

IEC60060-2:2010 高电压测量技术第2部分:测量系统High-voltage test techniques - Part 2: Measuring systems

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

IEC60060-1:2025 高压试验技术第1部分:通用术语和试验要求High-voltage test techniques - Part 1: General terminology and test requirements

IEC60060-1:2010 高电压试验技术第1部分:一般定义及试验要求High-voltage test techniques - Part 1: General definitions and test requirements

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

IEC60055-1:1997+AMD1:2005 额定电压18/30kV及以下铜芯或铝芯纸绝缘金属护套电缆第1部分:电缆及其附件试验Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories

IEC60044-8:2002 互感器第8部分:电子式电流互感器Instrument transformers - Part 8: Electronic current transformers

IEC60044-7:1999 互感器第7部分:电子式电压互感器Instrument transformers - Part 7: Electronic voltage transformers

IEC60044-2:1997+AMD1:2000+AMD2:2002 互感器第2部分:电磁式电压互感器Instrument transformers - Part 2 : Inductive voltage transformers

IEC60034-9:2003+AMD1:2007 旋转电机第9部分:噪声限值Rotating electrical machines - Part 9: Noise limits

废止��仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

IEC60034-8:2007+AMD1:2014 旋转电机第8部分:端子标记和旋转方向Rotating electrical machines - Part 8: Terminal markings anddirection of rotation

IEC60034-5-2020 旋转电机第5部分:旋转电机整体设计提供的保护等级(IP代码)分类Rotating electrical machines - Part 5- Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

IEC60034-5:2020 旋转电机-第5部分:旋转电机整体设计提供的防护等级(IP代码)分类Rotating electrical machines - Part 5- Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

IEC60034-5:2000/AMD1:2006 修改件1旋转电机第5部分:旋转电机整体设计提供的防护等级(IP代码)分类Amendment 1 - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

IEC60034-5:2000 旋转电机-第5部分:旋转电机整体设计提供的防护等级(IP代码)分类Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

IEC60034-4:2008 三相同步电机试验方法This part of IEC 60034 applies to three-phase synchronous machines of 1 kVA rating and larger with rated frequency of not greater than 500 Hz Rotating electrical machines - Part 4: Methods for determining synchronous machine quantities from tests

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

IEC60034-30-1:2025 旋转电机第30-1部分:线控交流电动机的效率等级(IE代号)IEC 60034-30-1:2025 specifies efficiency classes for single-speed electric motors that are rated in accordance with IEC 60034-1 or IEC 60079-0 Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code)

IEC60034-30-1:2014 旋转电机第301部分:线性交流电机的效率等级(IE编码)Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code)

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

IEC60034-27-4:2018 旋转电机-第27-4部分:旋转电机绕组绝缘的绝缘电阻和极化指数的测量Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index of winding insulation of rotating electrical machines

IEC60034-27-3:2015 旋转电机-第27-3部分:旋转电机定子绕组绝缘介质损耗因子测量Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines

IEC60034-27-1:2017 旋转电机-第27-1部分:绕组绝缘上的离线局部放电测量Rotating electrical machines - Part 27-1: Off-line partial discharge measurements on the winding insulation

IEC60034-2-3:2024 变频器供电交流电动机确定损耗和效率的特定试验方法Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors

IEC60034-22:2009 旋转电机第22部分:往复式内燃机(RIC)驱动的交流发电机Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

IEC60034-2-1:2024 旋转电机(牵引电机除外)确定损耗和效率的试验方法Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)

IEC60034-18-1:2022 旋转电机第18-1部分:绝缘系统的功能评估一般指南Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines

IEC60034-15:2025 旋转电机第15部分:旋转交流电机定子成型线圈耐冲击电压水平IEC 60034-15: 2025 relates to AC machines incorporating form-wound stator coils that are intended to be connected to a standard grid supply Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines

IEC60034-14:2018 旋转电机第14部分:轴中心高为56mm及以上电机的机械振动的测量､评定及限值Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity

IEC60034-14:2007 旋转电机第14部分:轴中心高为56mm及以上电机的机械振动的测量､评定及限值This part of IEC 60034 specifies the factory acceptance vibration test procedures and vibration limits for certain electrical machines under Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity

IEC60034-1-2010 旋转电机第1部分:额定值和性能This part of IEC 60034 is applicable to all rotating electrical machines except those covered by other IEC standards@ for example@ IEC 60349 [10]1 Rotating electrical machines - Part 1: Rating and performance

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

IEC60034-11:2020 旋转电机第11部分:热保护Rotating electrical machines - Part 11: Thermal protection

上一页 1487 1488 1489 1490 1491 下一页

需要产品质量检验检测服务？

腾树检测合作实验室具备 CMA/CNAS 双重资质，专业高效

电话咨询 17602199916 在线获取报价