首页 / 官方标准库 / 产品质量检验
官方标准 · 一单一库

产品质量检验

共 47,217 条标准
标准列表(第 1474 / 1574 页)
官方标准
IEC60332-3-23:2000 电缆和光缆在火焰条件下的燃烧试验第34部分:垂直安装的成束电线电缆火焰垂直蔓延试验B类 Tests on electric cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B
废止,仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...
现行有效
ID: 44761
官方标准
IEC60332-3-22:2018 电缆和光缆在火焰条件下的燃烧试验第3-22部分:垂直安装的成束电线或电缆的垂直火焰蔓延试验A类Tests on electric cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A
暂无备注
现行有效
ID: 44762
官方标准
IEC60332-3-22:2004 电缆和光缆在火焰条件下的燃���试验第3-22部分:垂直安装的成束电线或电缆的垂直火焰蔓延试验A类Tests on electric cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A
暂无备注
现行有效
ID: 44763
官方标准
IEC60332-3-22:2000 电缆和光缆在火焰条件下的燃烧试验第33部分:垂直安装的成束电线电缆火焰垂直蔓延试验A类 Tests on electric cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A
废止,仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...
现行有效
ID: 44764
官方标准
IEC60332-3-21:2018 电缆在火焰条件下的燃烧试验第3-21部分:垂直安装的成束电线或电缆的垂直火焰蔓延试验AF/R类Tests on electric and optical fibre cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R
暂无备注
现行有效
ID: 44765
官方标准
IEC60332-3-21:2004 电缆在火焰条件下的燃烧试验第3-21部分:垂直安装的成束电线或电缆的垂直火焰蔓延试验AF/R类Tests on electric and optical fibre cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R
暂无备注
现行有效
ID: 44766
官方标准
IEC60332-3-21:2000 电缆和光缆在火焰条件下的燃烧试验第32部分:垂直安装的成束电线电缆火焰垂直蔓延试验AF/R类Tests on electric cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R
废止,仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...
现行有效
ID: 44767
官方标准
IEC60332-3-10:2018 电缆和光缆在火焰条件下的燃烧试验第31部分:垂直安装的成束电线电缆火焰垂直蔓延试验试验装置Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
暂无备注
现行有效
ID: 44768
官方标准
IEC60332-3-10:2000 电缆在着火条件下的试验.第3-10部分:垂直束状电线或电缆垂直火焰蔓延的试验.仪器Tests on electric cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
废止,仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...
现行有效
ID: 44769
官方标准
IEC60332-2-2:2004 电缆和光缆在火焰条件下的燃烧试验第2-2部分:单根绝缘细电线电缆火焰垂直蔓延试验扩散型火焰试验方法Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame
暂无备注
现行有效
ID: 44770
官方标准
IEC60332-2-1:2004 电缆和光缆在火焰条件下的燃烧试验第2-1部分:单根绝缘细电线电缆火焰垂直蔓延试验试验装置Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus
暂无备注
现行有效
ID: 44771
官方标准
IEC60332-1-3:2015 电缆和光缆在火焰条件下的燃烧试验第13部分:单根绝缘电线电缆火焰垂直蔓延试验测定燃烧的滴落(物)/微粒的试验方法Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles
暂无备注
现行有效
ID: 44772
官方标准
IEC60332-1-3:2004/AMD1:2015 修改件1.着火条件下电缆和光缆的试验.第1-3部分:单根绝缘电线或电缆的垂直火焰传播试验.燃烧液滴/颗粒的测定程序Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles
暂无备注
现行有效
ID: 44773
官方标准
IEC60332-1-2:2025 着火条件下电缆和光缆的试验第1-2部分:单根绝缘电线或电缆的垂直火焰传播试验1kW预混合火焰的程序Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
暂无备注
现行有效
ID: 44774
官方标准
IEC60332-1-2:2015 电缆和光缆在火焰条件下的燃烧试验第12部分:单根绝缘电线电缆火焰垂直蔓延试验1kW预混合型火焰试验方法Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
暂无备注
现行有效
ID: 44775
官方标准
IEC60332-1-2:2004+AMD1:2015 电缆和光缆在火焰条件下的燃烧试验第1-2部分:单根绝缘电线电缆火焰垂直蔓延试验1kW预混合型火焰试验方法Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
废止,仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...
现行有效
ID: 44776
官方标准
IEC60332-1-2:2004 电缆和光缆在火焰条件下的燃烧试验第1-2部分:单根绝缘电线电缆火焰垂直蔓延试验1kW预混合型火焰试验方法Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
废止,仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...
现行有效
ID: 44777
官方标准
IEC60332-1-1:2015 电缆和光缆在火焰条件下的燃烧试验第11部分:单根绝缘电线电缆火焰垂直蔓延试验试验装置Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
暂无备注
现行有效
ID: 44778
官方标准
IEC60332-1-1:2004 电缆和光缆在火焰条件下的燃烧试验第1-1部分:单根绝缘电线电缆火焰垂直蔓延试验试验装置Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
暂无备注
现行有效
ID: 44779
官方标准
IEC60331-4:2024 电缆在火灾条件下的试验 电路完整性 第4部分:额定电压高于1千伏至30千伏(含30千伏)的电缆在至少830℃温度下冲击火灾的试验方法Tests for electric cables under fire conditions - Circuit integrity - Part 4: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage higher than 1 kV up to and including 30 kV
暂无备注
现行有效
ID: 44780
官方标准
IEC60331-3:2018 在火焰条件下电缆或光缆的线路完整性试验第3部分:火焰温度不低于830℃的供火并施加冲击振动,额定电���0.6/1kV及以下电缆穿在金属管中进行的试验方法Tests for electric cables under fire conditions - Circuit integrity -Part 3: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure
暂无备注
现行有效
ID: 44781
官方标准
IEC60331-3:2009 在火焰条件下电缆或光缆的线路完整性试验第3��分:火焰温度不低于830℃并施加冲击-额定电压0.6/1kV及以下,穿在金属管中的电缆Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure
废止,仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...
现行有效
ID: 44782
官方标准
IEC60331-25:1999 在火焰条件下电缆或光缆的线路完整性试验第25部分:试验步骤和要求光缆Tests for electric cables under fire conditions - Circuit integrity - Part 25: Procedures and requirements - Optical fibre cables
暂无备注
现行有效
ID: 44783
官方标准
IEC60331-23:1999 在火焰条件下电缆或光缆的线路完整性试验第23部分:试验步骤和要求数据���缆Tests for electric cables under fire conditions - Circuit integrity - Part 23: Procedures and requirements - Electric data cables
暂无备注
现行有效
ID: 44784
官方标准
IEC60331-21:1999 在火焰条件下电缆或光缆的线路完整性试验第21部分:试验步骤和要求额定电压0.6/1.0kV及以下电缆Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV
暂无备注
现行有效
ID: 44785
官方标准
IEC60331-2:2018 在火焰条件下电缆或光缆的线路完整性试验第2部分:火焰温度不低于830℃的供火并施加冲击振动,额定电压0.6/1kV及以下外径不超过20mm电缆的试验方法Tests for electric cables under fire conditions - Circuit integrity -Part 2: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm
暂无备注
现行有效
ID: 44786
官方标准
IEC60331-2:2009 在火焰条件下电缆或光缆的线路完整性试验第2部分:火焰温度不低于830℃并施加冲击-额定电压0.6/1kV及以下电缆,电缆直径不超过20mmTests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm
废止,仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...
现行有效
ID: 44787
官方标准
IEC60331-11:1999 在火焰条件下电缆或光缆的线路完整性试验第11部分:试验装置-火焰温度不低于750℃的单独供火Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C
暂无备注
现行有效
ID: 44788
官方标准
IEC60331-1:2018 在火焰条件下电缆或光缆的线路完整性试验第1部分:火焰温度不低于830℃的供火并施加冲击振动,额定电压0.6/1kV及以下外径超过20mm电缆的试验方法Tests for electric cables under fire conditions - Circuit integrity -Part 1: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm
暂无备注
现行有效
ID: 44789
官方标准
IEC60331-1:2009 在火焰条件下电缆或光缆的线路完整性试验第1部分:火焰温度不低于830℃并施加冲击-额定电压0.6/1kV及以下电缆,电缆直径超过20mmTests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm
废止,仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...
现行有效
ID: 44790
上一页 1472 1473 1474 1475 1476 下一页

需要 产品质量检验 检测服务?

腾树检测合作实验室具备 CMA/CNAS 双重资质,专业高效

电话咨询 17602199916 在线获取报价