首页 / 官方标准库 / 产品质量检验

官方标准 · 一单一库

产品质量检验

共 47,217 条标准

标准列表（第 1429 / 1574 页）

IEC61300-2-52:2013 光纤互连设备和被动元件-基本测试和测量程序-第2-52部分:测试-线的弯曲测试Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-52: Tests - Bending test for cords

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

IEC61300-2-51:2007 光纤互连设备和无源元件-基本测试和测量程序-第2-51部分:测试-应用拉伸负载传输的光纤连接器测试-单模和多模Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode

IEC61300-2-50:2007 光纤互连器件和无源器件基本测试和测量程序第2-50部分:试验光静态负载光纤连接器校验试验单模和多模Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-50: Tests - Fibre optic connector proof test with static load - Singlemode and multimode

IEC61300-2-5:2022 纤维光学互连器件和无源元件基本试验和测量程序第2-5部分:试验扭转Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion

IEC61300-2-48:2009 光纤互连设备和无源元件-基本测试和测量程序-第2-48部分:测试-温湿度循环Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests - Temperature-humidity cycling

IEC61300-2-47:2016 光纤互连器件和被动元件-基本测试和测量程序-第2-47部分:测试-热冲击Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks

IEC61300-2-46:2019 光纤互连器件和无源元件-基本测试和测量程序-第2-46部分:测试-阻尼热循环Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat, cyclic

IEC61300-2-44:2024 纤维光学互连器件和无源元件基本试验和测量程序第2-44部分:试验纤维光学器件和元件应力消除的弯曲Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices and components

IEC61300-2-42:2014 光纤互连设备和无源元件-基本测试和测量程序-第2-42部分:测试-用于应变消除的静态侧负载Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for strain relief

IEC61300-2-4:2020 纤维光学互连器件和无源器件基本试验和测量程序第2-4部分:试验光纤光缆保持力Fibreopticinterconnectingdevicesandpassivecomponents-Basictestandmeasurementprocedures-Part2-4:Tests-Fibreorcableretention

IEC62236-3-2:2008 轨道交通电磁兼容第3-2部分:机车车辆设备Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus

废止，仅限能力项目库范围内现行有效产品标准引用本��准及监督抽检时申请...

IEC62236-3-1:2018 轨道交通电磁兼容第3-1部分:机车车辆列车和整车Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle

IEC62236-3-1:2008 轨道交通电磁兼容第3-1部分:机车车辆列车和整车Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle

��止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

IEC62236-2:2018 轨道交通电磁兼容第2部分:整个轨道系统对外界的发射Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world

IEC62236-1:2018 轨道交通电磁兼容第1部分:总则Railway applications - Electromagnetic compatibility - Part 1: General

IEC62233:2005 家用电器和类似用途设备有关人体辐射的电磁场的测量方法Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure

IEC62232:2025 为了评估人体暴露测定基站附近的射频场强度､功率密度和SARDetermination of RF field strength, power density and SAR in the vicinity of base stations for the purpose of evaluating human exposure

IEC62231:2006 交流电压大于1000V至245kV的变电站用复合站柱绝缘子.定义､试验方法和验收标准Composite station post insulators for substations with a.c. voltages greater than 1000 V up to 245 kV - Definitions, test methods and acceptance criteria

IEC62219:2002 型线同心绞架空导线Overhead electrical conductors - Formed wire, concentric lay, stranded conductors

IEC62217:2025 户内外用高压聚合物绝缘子-通用定义､试验方法和验收标准Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria

IEC62217:2012 标称电压高于1000V使用的户内和户外聚合物绝缘子一般定义､试验方法和接收准则Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

IEC62215-3:2013 集成电路脉冲抗扰度测量第3部分:非同步瞬态注入法Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method

IEC62208:2023 低压成套开关设备和控制设备空壳体的一般要求Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements

IEC62208:2011 低压成套开关设备和控制设备空壳体的一般要求Empty enclosures for low-voltage switchgear and controlgear assemblies -General requirements

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

IEC62199:2004 直流系统用套管Bushings for d.c. application

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

IEC62196-3:2022 插头､插座､车辆连接器及车辆插孔电动汽车的传导充电第3部分:直流电和交流电/直流电引脚和接触管车辆耦合器的尺寸兼容��和互换性要求Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

IEC62196-2:2022 插头､插座､车辆连接器和车辆入口电动车辆的传导充电-第2部分:交流插针和接触管附件的尺寸兼容性要求Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility requirements for AC pin and contact-tube accessories

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

IEC62196-2:2016 插头插座插座车辆连接器和车辆入口电动车辆的导电充电第2部分:尺寸兼容性和互换性要求对于AC针和接触管配件Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for ac pin and contact-tube accessories

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

IEC62196-1:2022 插头､插座､车辆连接器和车辆入口电动汽车的传导充电第1部分:一般要求Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements

废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请...

IEC62155:2003 额定电压高于1000V的电器设备用承压和非承压空心瓷和玻璃绝缘子Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V

上一页 1427 1428 1429 1430 1431 下一页

需要产品质量检验检测服务？

腾树检测合作实验室具备 CMA/CNAS 双重资质，专业高效

电话咨询 17602199916 在线获取报价